Orbit

系所成員
This is an image
廖 國基
專任師資
姓名 廖 國基
電子郵件 kokki@ntu.edu.tw
聯絡電話 02-33665332
職稱 副教授
研究專長 精密製造
塑性力學
疲勞分析
數值模擬
授課領域 機械元件設計
機械工作法實習
高等機械設計
工程疲勞分析
學術著作 http://ah.ntu.edu.tw/web/Teacher!one.action?tid=1561
  1. Leu, S.-Y., Liao, K.-C., Lin, Y.-C., "Plastic limit pressure of spherical vessels with combined hardening involving large deformation" , International Journal of Pressure Vessels and Piping, accepted, 2014 (SCI, EI), 2014年
  2. 謝文賓，羅遠傑，陳啟倫，廖國基, "電動病床雙邊驅動式升降傾斜機構設計與應力分析" , Journal of Advanced Engineering, vol. 7, pp. 23-39 , 2012年
  3. Liao, K.-C. and Chen, C.-L., "Analysis of Micro/mesoscale Sheet Stamping Processes Based on Crystalline Plasticity Model" , Journal of Chinese Institute of Engineers, vol. 35 (SCI, EI), 2012年
  4. Liao, K.-C. and Chen, T.-Y., "Springback Evaluation of Porous Sheets under Draw Bending Procedures" , Advanced Science Letters, vol. 8, pp. 677-681 (EI), 2012年
  5. Hsu, S.-W. and Liao, K.-C., "Wear Analysis and Verification of Metallic Terminals for Electronic Connectors" , Engineering Failure Analysis, vol. 25, pp. 71-80 (SCI, EI), 2012年
  6. Liao, M.-S., Chuang, C.-L., Lin, T.-Z., Chen, C.-P., Zheng, X.-Y., Chen, P.-T., Liao, K.-C., Jiang, J.-A., "Development of an autonomous early warning system for Bactrocera dorsalis (Hendel) outbreaks in remote fruit orchards" , Computers and Electronics in Agriculture, accepted (SCI, EI), 2012年
  7. Liao, K.-C., Chen, C.-L., and Chang, K.-M., "Failure Assessments of Porous Aluminum Sheets under Stretching Procedures" , Advanced Science Letters, vol. 4, pp. 2991-2995 (EI), 2011年
  8. Wang, J.-C., Shieh, J.-C., Su,Y.-L., Kuo, K.-C., Chang, Y.-W., Liang, Y.-T., Chou, J.-J., Liao, K.-C., Jiang, J.-A., "A Novel Method for the Determination of Dynamic Resistance for Photovoltaic Modules" , Energy, vol. 36, pp. 5968-5974 (SCI, EI), 2011年
  9. Liao, K.-C. and Chen, "C.-L., Investigation of Surface Roughness of Aluminum Alloy Sheet Based on Crystalline Plasticity Model" , Computational Materials Science, vol. 49, pp. S47-S53 (SCI, EI), 2010年
  10. Chiang, M.-H., Liao, K.-C., Lin, I.-M., Lu, C.-C., Huang, H.-Y., Kuo, C.-L., and Wu, J.-S.,"Modification of Hydrophilic Property of Polypropylene Films by a Parallel-plate Nitrogen-based Dielectric Barrier Discharge Jet" , Transactions on Plasma Science, vol. 38, pp. 1489-1498 (SCI, EI), 2010年
  11. Chiang, M.-H., Liao, K.-C., Lin, I.-M., Lu, C.-C., Huang, H.-Y., Kuo, C.-L., Wu, J.-S., Hsu, C.-C., and Chen, S.-H., "Effects of Oxygen Addition and Treating Distance on Surface Cleaning of ITO Glass by a Non-Equilibrium Nitrogen Atmospheric-Pressure Plasma Jet" , Plasma Chemistry and Plasma Processing, vol. 30, pp.553-563 (SCI, EI), 2010年
  12. 江昭皚，盧福明，楊恩誠，曾傳蘆，廖國基，嚴崇瑋, "東方果實蠅生態監測與預警系統" , 自動化科技學會會刊, 2009年04月
  13. Liao, K.-C. and Chang, C.-C., "Applications of Damage Models to Durability Investigations for Electronic Connectors" , Materials & Design, vol. 30, pp. 194-199 (SCI, EI) , 2009年
  14. Liao, K.-C., Cian, Y.-A., and Lin, W.-C., "Fatigue Life Assessment of an Innovative Laptop Hinge" , Materials & Design, vol. 30, 1497-1502 (SCI, EI) , 2009年
  15. Liao, K.-C. and Chang, C.-C., "Relaxation Investigation on Durability for Terminals of CPU Socket Connectors" , Materials & Design, vol. 30, pp. 252-255 (SCI, EI), 2009年
  16. Liao, K.-C., "Applications of Planar Anisotropic Yield Criteria to Porous Sheet Metal Forming Simulations" , European Journal of Mechanics – A/Solids, vol. 28, pp. 806-810 (SCI, EI) , 2009年
  17. Liao, K.-C. and Lin, K.-H., "Effects of Thermal and Moisture Absorption on Contact Forces of Electronic Connectors" , Journal of Chinese Institute of Engineers, vol. 32 (SCI, EI), 2009年
  18. Liao, K.-C., "Elastic-Plastic Fracture Mechanics Model for Planar Isotropic Porous Materials with Small Mixed-Mode Cracks" , Defect and Diffusion Forum (EI) , 2009年
  19. Liao, K.-C., "Applications of Anisotropic Yield Criteria to Porous Sheet Metal Forming Simulations" , Materials & Design, vol. 29, pp. 1000-1010 (SCI, EI) , 2008年
  20. Feng, H. P., Liao, K.-C., and Cheng, C. D., "Fracture Toughness of Powder Forged Iron-based Alloys" , MingChi University of Technology Journal, vol. 37, pp. 37-41, 2006年
  21. Liao, K.-C., "Yield Criteria for Porous Ductile Sheet Metals with Planar Anisotropy under Plane Stress Conditions" , Computers & Structures, vol. 82, pp. 2573-2583 (SCI, EI) , 2004年
  22. Wang, D.-A., Chien, W. Y., Liao, K.-C., Pan, J., and Tang, S. C., "A Gurson Yield Function for Anisotropic Porous Sheet Metals and Its Applications to Failure Prediction of Aluminum Sheets" , The Chinese Journal of Mechanics-Series A, vol. 19, No. 1, pp. 161-168 (SCI, EI) , 2003年
  23. Friedman, P. A., Liao, K.-C., Pan, J. and Barlat, F., "Texture Development and Hardening Characteristics of Steel Sheet under Plane Strain Conditions" , Journal of Materials Engineering and Performance, vol. 8, pp. 225-235 (SCI, EI), 1999年
  24. Liao, K.-C., Pan, J. and Tang, S. C., "Effects of Yield Surface Shape on Sheet Metal Forming Simulations" , Int. J. Numer. Methods Eng., vol. 41, pp. 559-584 (SCI, EI) , 1998年
  25. Liao, K.-C., Friedman, P. A., Pan, J. and Tang, S. C., "Texture Development and Plastic Behavior of B.C.C. Strain Hardening Sheet Metals with Planar Anisotropy Based on a Polycrystal Model" , Int. J. Solids Struct., vol. 35, pp. 5205-5236 (SCI, EI), 1998年
  26. Liao, K.-C., Pan, J. and Tang, S. C., "Approximate Yield Criteria for Anisotropic Porous Ductile Sheet Metals" , Mechanics of Materials, vol. 26, pp. 213-226 (SCI, EI) , 1997年
  1. Liao, C.-F., Liu, S.-P., and Liao, K.-C., "Applications of Laser Welding to Electric Connectors" , The 15th International Conference on Thermal & Mechanical Simulation and Experiments in Micro-electronics and Micro-systems, Ghent, Belgium, April 7 - April 9, 2014年04月
  2. 連惟忞，邱偉忠，廖國基, "機械手背內部柔輪之疲勞授命評估" , 機械工程學會第三十屆機械工程學術研討會，宜蘭，台灣，十二月六–七日, 2013年12月
  3. 廖崇甫，廖國基, "雷射銲接於電子連接器之應用" , 力學學會第三十七屆全國力學會議，新竹，台灣，十一月八–九日, 2013年11月
  4. 卓岳廷，廖國基, "電子連接器高分子材料結構失效評估" , 機械工程學會第二十九屆機械工程學術研討會，高雄，台灣，十二月七–八日, 2012年12月
  5. 徐上為，廖國基, "電子連接器金屬彈片磨耗分析與驗證" , 力學學會第三十五屆全國力學會議，台南，台灣，十一月十八–十九日, 2011年11月
  6. Chang, Y.-W., Lin, T.-S., Wang, J.-C., Chou, J.-J., Liao, K.-C., Jiang, J.-A., "The Effect of Temperature Distribution on the Vertical Cultivation in Plant Factories with a WSN-based Environmental Monitoring System" , 2011 International Conference on Agricultural and Natural Resources Engineering, published in Advances in Biomedical Engineering, Singapore, Singapore, July 30-31, 2011年07月
  7. 王絢姻，高培均，顏炳郎，廖國基, "乳房病變組織力學特性" , 2010年生物機電與農機科技論文發表會，屏東，台灣，十一月十八–十九日, 2010年11月
  8. 徐上為，廖國基，陳世銘，鄭宇帆，陳毓良, "應用太陽能輔助熱泵系統於平面式植物工廠之環境整合控制與效能分析" , 2010年生物機電與農機科技論文發表會，屏東，台灣，十一月十八–十九日, 2010年11月
  9. 廖敏勝，陳家榜，林子翔，張菀貽，鄭翔耀，廖國基，楊恩誠，江昭皚, "福壽螺疫情監測系統" , 2010年生物機電與農機科技論文發表會，屏東，台灣，十一月十八–十九日, 2010年11月
  10. 張延瑋，蔡志揚，張菀貽，林政翰，王人正，劉壬皓，廖國基，江昭皚, "無線感測器網路應用於植物工廠環境控制系統之開發" , 2010年生物機電與農機科技論文發表會，屏東，台灣，十一月十八–十九日, 2010年11月
  11. 陳啟倫，張可旻，廖國基, "多孔鋁合金薄板於張伸製程之失效評估" , 力學學會第三十四屆全國力學會議，雲林，台灣，十一月十九–二十日, 2010年11月
  12. Shieh, J.-C., Lai, T.-Y., Chuang, C.-L., Yang, E.-C., Liao, K.-C., Tasy, J.-R., Hsu, W.-H., and Jiang, J.-A., "Study of Routing Path Reliability for Static Outdoor Wireless Sensor Networks in Ecological Monitoring" , The 5th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB 2010), Fukuoka, Japan, April 5-7, 2010年04月
  13. Tseng, C.-L., Jiang, J.-A., Wang, J.-C., Lin, Y.-J., Tsai, Z.-Y., Chung, T.-P., Liao, K.-C., and Ho, K.-Y, "Design of Power-saving Automatic Counting Traps for an Ecological Monitoring System of Oriental Fruit Fly" , The 5th International Symposium on Machinery and Mechatronics for Agricultural and Biosystems Engineering (ISMAB 2010), Fukuoka, Japan, April 5-7, 2010年04月
  14. Liao, K.-C. and Chen, C.-L., "Analysis of Micro/mesoscale Sheet Stamping Processes Based on Crystalline Plasticity Model" , The International Conference on Computational Science and Its Applications, Kyushu Sangyo University, Fukuoka, Japan, Mar 23-26, 2010年03月
  15. 陳啟倫，廖國基, "病床/推床護欄與電動病床升降機構之設計與分析" , 2009 ABAQUS Users’ Conference, 桃園，台灣，November 3-4, 2009年11月
  16. Chu, Y.-J., Tseng, C.-P., Wang, Y.-C., Liao, K.-C., Tseng, C.-L., Yang, E.-C., Wu, Y.-C., Ouyang, C.-S., Yen, C.-W., and Jiang, J.-A., "Application of Load-Balanced Tree Routing Algorithm with Dynamic Modification to Centralized Wireless Sensor Networks" , IEEE Sensors 2009 Conference, Christchurch, New Zealand, October 25-28, 2009年10月
  17. Chen, C.-P., Chuang, C.-L., Lin, T.-S., Hung, C.-H., Liao, K.-C., Shieh, J.-C., and Jiang, J.-A., "A Novel Coverage-preserving Algorithm with Energy Efficiency" , IEEE Sensors 2009 Conference, Christchurch, New Zealand, October 25-28, 2009年10月
  18. Jiang, J.-A., Chen, C.-P., Lin, T.-S., Lai, T.-Y., Hung, C.-H., Yang, E.-C., Tseng, C.-L., Lu, F.-M., Liao, K.-C., Shieh, J.-C., "Pest Hot Spot Detection for the Oriental Fruit Fly (Bactrocera dorsalis (Hendel)) via Wireless Sensors Networks" , WASN 2009, Hsin-Chu, Taiwan, September 10-11, 2009年09月
  19. 江昭皚，洪志宏，賴子雲，王景儀，劉昌旺，陳家榜，林子翔，盧福明，楊恩誠，曾傳蘆，廖國基, "自動重新路由機制對提升集中式無線感測網路系統之效能評估" , WASN 2009，新竹，台灣，九月十–十一日, 2009年09月
  20. Liao, K.-C. and Lin, W.-C., "Fatigue Life Assessment of a Novel Mobile Phone Hinge" , 12th International Conference on Fracture, Ottawa, Ontario, Canada, July 12-17, 2009年07月
  21. 孫睿鴻，陳世銘，陳毓良，邱奕志，張允瓊，廖國基，蔡錦銘，李柔靜, "無線感測網路於溫室內立體溫場量測系統之應用" , 2009年生物機電與農機科技論文發表會，宜蘭，台灣，七月二十二–二十三日, 2009年07月
  22. 陳啟倫，廖國基, "聚晶體模型於鋁合金薄板表面粗糙化之應用" , 2009年生物機電與農機科技論文發表會，宜蘭，台灣，七月二十二–二十三日, 2009年07月
  23. Chiang, M.-H., Lin, I.-M., Lu, C.-C., Huang, H.-Y., Wu, J.-S., and Liao, K.-C.,"Characterization of a Nitrogen-based Planar DBD APPJ and Its Application in ITO Glass Cleaning" , CAPPSA 2009 - 4th International Congress on Cold Atmospheric Pressure Plasmas: Sources and Applications, Gent, Belgium, June 22-24, 2009年06月
  24. Chen, C.-L. and Liao, K.-C., "Applications of Polycrystalline Model to Surface Roughening Simulations" , ICMAT 2009 – International Conference on Materials for Advanced Technologies, Singapore, June 28 – July 3, 2009年06月
  25. 錢勇安，林韋全，朱筧虹，廖國基, "筆記型電腦旋轉樞軸疲勞壽命評估" , 機械工程學會第二十五屆機械工程學術研討會，彰化，台灣，十一月二十一–二十二日, 2008年11月
  26. 林凱琥，廖國基, "熱濕效應於電子連接器影響之檢視" , 力學學會第三十二屆全國力學會議，嘉義，台灣，十一月二十八–二十九日, 2008年11月
  27. Liao, K.-C. and Chiu, W.-C., "Investigation of Relaxation Behavior for Terminals of CPU Socket Connectors" , HOLM 2008 – 54th IEEE HOLM Conference on Electrical Contacts, Orlando, Florida, USA, October 27-29, 2008年
  28. Liao, K.-C. and Lin, K.-H., "Relaxation Investigation for Terminals of Electronic Connectors under Thermal Shock Test" , 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, November 11-15, 2007年
  29. 廖國基，林凱琥, "從模流到結構分析-以電子連接器承受高溫高濕條件為例" , 2007 ABAQUS Users’ Conference，宜蘭，台灣，十一月七-八日, 2007年
  30. Liao, K.-C. and Chang, C.-C., "Relaxation Investigation on Durability for Terminals of CPU Socket Connectors" , 7th International Congress on Thermal Stresses, Taipei, Taiwan, June 4-7, 2007年
  31. 劉奕君，廖國基, "新次工程塑料與成型參數於記憶卡連接器塑膠基座翹曲影響之檢視" , 力學學會第三十一屆全國力學會議，高雄，台灣，十二月二十一–二十二日, 2007年
  32. 林凱琥，廖國基, "電子連接器承受冷熱衝擊試驗之應力鬆弛檢視" , 力學學會第三十一屆全國力學會議，高雄，台灣，十二月二十一–二十二日, 2007年
  33. 林韋全，陳嘉振，謝文賓，廖國基, "新型摺疊式照相行動電話模組化上蓋旋轉機構之專利分析與概念設計" , 機械工程學會第二十四屆機械工程學術研討會，桃園，台灣，十一月二十三–二十四日, 2007年
  34. 張其哲，廖國基, "臨界平面法於輸出/輸入電子連接器可靠度評估與使用者視窗介面開發之研究" , 力學學會第三十屆全國力學會議，彰化，台灣，十二月十五-十六日, 2006年
  35. 張其哲，廖國基, "CPU插槽連接器金屬彈片應用壽命初期檢視" , 機械工程學會第二十三屆機械工程學術研討會，台南，台灣，十一月二十四-二十五日, 2006年
  36. Chang, C. C. and Liao, K.-C., "Applications of Damage Models to Reliability Investigations for Input/Output Electronic Connectors" , 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, U.S.A., November 5-10, 2006年
  37. Liao, K.-C., Feng, H. P., and Tsai, H. H., "Elastic-Plastic Fracture Mechanics model for Anisotropic Porous materials with Small Mixed-Mode Cracks" , The 9th International Fatigue Congress, Atlanta, U.S.A., May 14-19, 2006年
  38. Liao, K.-C., "Applications of Planar Isotropic Yield Criteria to Porous Sheet Metal under a Deep Drawing Simulation" , Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, Massachusetts, U.S.A., June 14-17, 2005年
  39. 馮慧平，廖國基，鄭春德, "還原鐵粉燒結鋼破壞力學性質" , 第四屆台塑關係企業應用技術研討會，台北，台灣，五月二十七日, 2005年
  40. Liao, K.-C., Feng, H. P., Cheng, C. D., Tsai, H. H., and Shieh, W.-B., "Mechanical Properties of Sintered Kovar Alloys for Structure Components of Optical Devices" , EuroSimE 2005 Conference, Berlin, Germany, April 18-20, 2005年
  41. Liao, K.-C., "Applications of Planar Anisotropic Yield Criteria to Porous Aluminum Sheet Forming Simulations" , The Eleventh International Symposium on Plasticity 2005, Kauai, Hawaii, U.S.A., January 3-8, pp. 115-117, 2005年
  42. Liao, K.-C., "Investigation of Warpage of PBGA without Solder Joints under Encapsulation Processes" , 機械工程學會第二十一屆機械工程學術研討會，高雄，台灣，十一月二十六-二十七日, 2004年
  43. Liao, K.-C., "Applications of Planar Anisotropic Yield Criteria to Porous Sheet Metals under a Stretching Operation" , 2003 ASME Mechanics and Materials Conference, Scottsdale, Arizona, U.S.A., June 17-20, 2003年
  44. Lee, K.-T., Tsai, H. H., and Liao, K.-C., "Investigation of the Dilation of Epoxy with Negative Thermal Expansion Fillers" , Investigation of the Dilation of Epoxy with Negative Thermal Expansion Fillers, 2003年
  45. Tsai, H. H., Lee, K.-T., Shieh, W.-B., and Liao, K.-C., "Experimental Investigation of the Curing Shrinkage of Extra Low Dilated Epoxy by Fiber Bragg Grafting" , The 3rd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics, Montreux, Switzerland, October 20-23, 2003年
  46. Liao, K.-C., Shieh, W.-B., and Tsai, H. H., "Preliminary Investigation of Coupling Efficiency Improvement for Thin-Film-Based Passive Optical Components" , 5th International Conference on Electronics Materials and Packaging, Singapore, November 17-19, pp. 348-352, 2003年
  47. Tsai, H. H. and Liao, K.-C., "Feasibility Study of Athermal Packaging for Fiber Bragg Gratings by Invar Effect Substrate" , The 4th International Conference on Thermal & Mechanical Simulation and Experiments in Micro-electronics and Micro-systems, Aix-en-Provence, France, March 30 - April 2, pp. 147-151, 2003年
  48. Liao, K.-C. and Tsai, H. H., "Reliability Investigations of Flip Chip Package with Porous Solder Joints" , The 4th International Conference on Thermal & Mechanical Simulation and Experiments in Micro-electronics and Micro-systems, Aix-en-Provence, France, March 30 - April 2, pp. 63-67, 2003年
  49. Shieh, W.-B., and Tsai, H. H., and Liao, K.-C., "The Stabilization of Central Wavelength of Fiber Bragg Gratings by Thermal Contraction Effect of Kovar Substrate" , 5th International Conference on Electronics Materials and Packaging, Singapore, November 17-19, pp. 158-163, 2003年
  50. Liao, K.-C., "Applications of Planar Anisotropic Yield Criteria to Porous Sheet Metal Stretching Simulation" , 第二十屆機械工程研討會學術研討會，台北，台灣，十二月五-六日, 2003年
  51. 廖國基, "電子插槽連接器端子應力鬆弛模擬之先期研究" , 力學學會第二十七屆全國力學會議，台南，台灣，十二月十二-十三日, 2003年
  52. Liao, K.-C., "Verification of Yield Criteria for Anisotropic Porous Sheet Metals under Plane Stress Conditions" , 2002 ABAQUS Users’ Conference, Taipei, Taiwan, November 3-4, 2002年
  53. Tsai, H. H. and Liao, K.-C., "Preliminary Investigation of the Athermal Package by Bimetal Structure for Fiber Brass Gratings" , Preliminary Investigation of the Athermal Package by Bimetal Structure for Fiber Brass Gratings, Proceedings of 2002 SME Taipei Chapter Conference, Taipei, Taiwan, November 10-11, 2002年
  54. Liao, K.-C., "Modified Anisotropic Yield Criteria for Porous Ductile Sheet Metals under Plane Stress Conditions" , The 26th Conference on Theoretical and Applied Mechanics, Hu-Wei, Taiwan, December 20-21, 2002年
  55. Lin, C. C. and Liao, K.-C., "Cooling Effects on Electrical Connectors under the Injection Molding Procedure" , C-MOLD 2000 International Conference Molding Technologies, Review and Forecast, Hsin-Chu, Taiwan, March 8-10, 2000年
  56. Liao, K.-C. and Lin, C. C., "Improvement of Warpage on Header Connector Based on Mold-Filling Analysis" , 1999 C-MOLD Thin-Wall Molding Techology User’s Conference, Hsin-Chu, Taiwan, March 12, 1999年
  57. Pan, J., Liao, K.-C. and Tang, S. C., "Anisotropic Yield and Damage Criteria for Sheet Metal Forming Simulations" , 3rd EURONECH Solid Mechanics Conference, 1997年
  58. Friedman, P. A., Liao, K.-C., Pan, J. and Tang, S. C., "Effects of Plastic Anisotropy on Sheet Metal Forming" , International Mechanical Engineering Congress and Exposition, Dallas, Texas, November 16-21, 1997年
  59. Liao, K.-C., Pan, J. and Tang, S. C., "A Macroscopic Yield Criterion for Porous Metals with Anisotropic Matrices and Its Applications to Sheet Forming Simulations" , 1997 Joint ASME/ASCE/SES Summer Meeting, Evanston, Illinois, June 29 - July 2, 1997年
  60. Friedman, P. A., Liao, K.-C. and Pan, J., "Texture Development and Hardening Characteristics of Steel Sheet During Cold Rolling" , 1997 Joint ASME/ASCE/SES Summer Meeting, Evanston, Illinois, June 29 - July 2, 1997年
  61. Liao, K.-C., Pan, J. and Tang, S. C., "Yield Criteria for B.C.C. Sheet Metals" , Proceedings of the Third International Conference on Numerical Simulation of 3-D Sheet Forming Processes, Dearborn, Michigan, September 29 - October 3, pp.355-358, 1996年
  62. Liao, K.-C., Friedman, P. A., Pan, J. and Tang, S. C., "Yield Criteria for B.C.C. Sheet Metal Forming Simulations" , International Mechanical Engineering Congress and Exposition, San Francisco, California, November 12-17, 1995年
  1. 廖國基, "板端低壓差動訊號連接器" , 中華民國專利，新型第M359840號, 2009年
  2. 廖國基, "線端低壓差動訊號連接器組合及其拉桿" , 中華民國專利，新型第M361782號, 2009年
學位論文
  1. Liao, K.-C., "Yield and Damage Criteria for Sheet Metal Forming Simulations" , Ph.D. Thesis, University of Michigan, Ann Arbor, Michigan, 1996年
學校名稱 國別 系所 學位 起迄年月
University of Michigan, Ann Arbor USA Applied Mechanics and Mechanical Engineering Ph.D. 1993年01月 ~ 1996年12月
 
服務機關 職稱 部門/系所 擔任職務 起迄年月
國立台灣大學 助理教授 生物產業機電工程系   2008年08月 ~ 2010年07月
國立雲林科技大學 副教授 機械工程系   2005年08月 ~ 2008年07月
明志科技大學 助理教授 機械工程系   2001年08月 ~ 2005年07月
鴻海精密有限公司 工程師 產品研發部   1997年07月 ~ 2001年07月
University of Michigan, Ann Arbor Post Doctoral Researcher Applied Mechanics and Mechanical Engineering   1997年01月 ~ 1997年05月
Copyright © 2015 國立臺灣大學生物機電工程學系
電話：886-2-2392-9769  傳真：886-2-2362-7620
地址：台北市大安區106羅斯福路四段一號
E-mail：bime@ntu.edu.tw
RulingDigital Powered by RulingDigital
造訪人次 : 3172462